Skip to product information
1 of 3

Zamp Z-20 Prism Visor

Zamp Z-20 Prism Visor

Product Inventory
loading..
Regular price $47.25
Regular price $52.50 Sale price $47.25
Sale Sold out
Shipping calculated at checkout.
Color

Zamp Z-20 Prism Visor

The Z-20 helmet shield is compatible with the following helmets.

    Compatibility

    • RZ-42Y / RZ-42Y Graphic
    • RZ-37Y
    • RZ-70E / RL-70E
    • RZ-64C
    • RZ-62 / RZ-62 Graphic / RZ-62 Air
    • RZ-60 / RZ-60V
    • RZ-36 / RZ-36 DIRT / RZ-36 Air
    • RZ-56 / RZ-56 Air
    • RZ-59
    • RZ-65D Graphic

    Replacement

    NOTE: DO NOT USE power tools or overtighten screws when changing shields.
    Step 1 - Lay a towel on a flat surface and set the helmet on it.
    Step 2 - Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)
    Step 3 - Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)
    Step 4 - Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.
    Step 5 - Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.
    Step 6 - Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.
    Step 7 - Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.
      View full details