Skip to product information
1 of 2

Wilwood BP-10 Compound Pad#6712 Dynapro 6 Brake Pads

Wilwood BP-10 Compound Pad#6712 Dynapro 6 Brake Pads

Product Inventory
Regular price $109.38
Regular price Sale price $109.38
Sale Sold out
Shipping calculated at checkout.

Wilwood BP-10 Compound Pad#6712 Dynapro 6 Brake Pads

Front brake pads for a Dynapro brake caliper.

SKU: wil150-10006K

Pad Characteristics

  • Medium friction pad
  • Gradual response, low abrasion on iron rotors
  • Low to medium wear rate at low temperatures
  • Low dust and noise
  • High performance street compound with improved friction, lower wear and lower dust levels than standard replacement pads

Pad Applications

  • Street use okay
  • Street
  • Muscle cars
  • Drag race
  • Light to medium braking on dirt including late models and modified

Rotor Material

  • Steel
  • Iron
BP-10 Performance StatsBP-10 Performance Stats Zoom Image
BP-10 Friction Coefficient and Temperature ValuesThe above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

View full details